
Type
4LC-355L-4
Brand
VYBO Electric
Power
315 kW
Rated current (380V)
562 A
Rated current (400V)
534 A
Rated current (415V)
515 A
Speed
1490 rpm
Frequency
50 Hz
(LRT/RTL)
1,8
(BDT/RLT)
2,2
(LRA/RLA)
8,5
Efficiency
96,7 %
Power factor
0,9
Noise level
92 dB(A)
Weight
1816 kg
Rotor inertia
9,32586 kg/m2
Frame
355 mm
Poles
4
Rated voltage
400 / 690 V
Connection
△/Y
Insulation class
F
Service factor
1,0
Duty
S1, S2, S3, S4-S9
Ambient temperature
-35~50°C
3D video of electric motor
Altitude
1000 m
Protection degree
IP55
Cooling
IC411
Mounting
IM B (on request)
Vibration
2.8 mm/s
Direction of rotation
both
Starting method
DOL or VFD
Coupling
direct
Load type
parabolic/linear curve
Terminal box
2-M63x1.5
Bearing
DE-NU322C3 / NDE-NU322C3
Specification
IEC60034-1 / GB755
Test
IEC60034-2 / GB/T1032
Noise
IEC60034-9 / GB10069.3
Vibration
IEC60034-14 / GB10068
Long description
For large operations, it is worth choosing a motor that can operate stably over the long term, save energy and at the same time reduce service downtime. 4LC-355L2-4 with an output of 315 kW belongs to the speed range of 1400-1500 rpm and is suitable where substantial cost savings are expected under continuous load. This low-voltage asynchronous electric motor from the professional VYBO Electric portfolio is designed for long-term operation in energy-intensive production lines where efficiency, reliability and resistance to operating fluctuations are decisive.
Efficiency and operating stability under heavy load
High efficiency of 96.7 % and a power factor of 0.9 provide a good basis for operation in which electricity consumption directly affects the resulting operating costs. In practice, this means that the motor helps to reduce energy losses during continuous running, which is especially important for units, conveyors, pumps and other technologies with high utilisation. The rated current delta 400 V is 534 A and the rated current Y 690 V is 310 A, so integration into power systems remains well predictable for designers.
Rated speed of 1490 rpm provides a stable operating point for technologies that require a balance between torque and smooth running. The starting torque ratio Tst/Tn 1.8, the breakdown torque ratio Tmax/Tn 2.2 and the starting current ratio Ist/In 8.5 give a clear picture of the drive behaviour at start-up and during dynamic load changes. Rotor inertia 9.3 kg*m² supports suitable dynamics for larger mechanical assemblies and, with proper connection design, helps the stability of the entire unit.
A design that helps in aggressive environments
Frame size 355 mm and fully cast iron construction give this solution a robust basis for long service life in industrial conditions. The heavy cast iron design is intended to better absorb vibration while increasing resistance to corrosion in environments with higher dust levels, humidity or chemical exposure. For large factories, this is a practical benefit, as more stable mounting and a sturdy casing reduce the risk of unwanted mechanical stress during continuous operation.
The motor has a noise level of 92 dB(A), which corresponds to a power class where the emphasis is placed primarily on robustness and continuous availability of the drive. 2-M63X1.5 cable glands make it easier to design industrial cabling and connections in control cabinet and machine assemblies. Bearing DE 6322-C3 and bearing NDE 6322-C3 support consistent shaft mounting in high-load operation, while the 3 PTC thermistors improve monitoring of the thermal condition of the winding.
Use in technological units with high utilisation
- Transport of bulk materials and process mixtures in heavy industry.
- Pump units for water management, process media and cooling circuits.
- Ventilation and extraction units in production halls with continuous operation.
- Compressor assemblies with a requirement for stable torque.
- Gear drive systems for mixing and homogenising equipment.
- Material processing lines in metallurgy, cement works and mining.
- Large technological systems where long service life and energy efficiency are decisive.
Dimensional and mounting data for engineering
Package dimensions 1607*822*1161 mm and package weight 1794 kg are important when planning transport, handling equipment and storage before installation. These data help technical teams prepare a safe move to the installation site and coordinate placement into frames, foundations or assemblies with limited space. When designing, it is also worth bearing in mind that this is a high-power motor intended for industrial applications with higher demands on load-bearing capacity and service access.
When selecting a drive for long-term deployment, we recommend assessing not only the output, but also efficiency, starting parameters, bearing arrangement and thermal monitoring. If you need a motor for universal industrial applications or for a specific technological unit, send us a no-obligation enquiry and we will prepare expert advice on suitability of connection, sizing and operating conditions.
Suitability for energy-intensive operation
For energy-saving industrial motors, it is essential that output, efficiency and mechanical durability function as one whole. In this model, these requirements meet in a robust solution that can be attractive for operations with a high annual running time and with an emphasis on drive supply reliability. VYBO Electric therefore offers a range that supports professional selection for new investments as well as modernisation of existing technologies.
4LC-355L2-4 with a power output of 315 kW, voltage 400/690 V and rated speed of 1490 rpm is designed for reliable drive operation in demanding conditions. The 355 mm frame size and robust cast-iron construction help dampen vibrations and resist corrosion in aggressive environments. VYBO Electric offers a proven range of drives with an emphasis on industrial use. Long description
Availability: In stock
Online contact
Model
4LC-355L-4
Power
315 kW
Rated voltage
400/690 V
Frame
355 mm
Poles
4
Frequency
50 Hz
Speed
1490 rpm
Frame type
cast iron
Dimensions
Datasheet online






