Variable frequency drives X550
More infoVariable frequency drives X550
Frequency converters VYBO Electric
Online contact
00421 907 937 187
(international sales manager)
E-mail: mv@vyboelectric.eu
Variable frequency drives X550 VYBO Electric
The frequency converter for the X550 0.75kW pump is a typical economy class device that is not only universal and integrated, but also has simple and clear controls. It is a product that is made on the basis of many years of experience of clients and their suggestions and comments, while it is also adapted to their requirements. Thanks to the fact that this model is fully pre-programmed, the user can start using it as soon as it is connected to the mains. It can be controlled in two ways, not only from the panel, but also externally remotely. To start the frequency converter, the user simply presses the START button and the user can use the built-in button to automatically decelerate or accelerate the electric motor as needed.
0,75kW - 18,5kW230V - 400V
Variable frequency drive X550 – Functions
– Power supply of the frequency converter with three-phase voltage 3 x 400 V AC
– Output frequency range 0 to 400 Hz
– Electric motor torque boost function by up to 20%
– X550 is suitable for controlling asynchronous motors
– RS 485 MODBUS physical interface integrated as standard
– MODBUS RTU communication interface
– Increased protection IP 65
– EMS immediate stop security feature
– Function for connecting PTC protection or thermal contact of the electric motor
– Built-in PID, PLC, AVR, 2 counters, etc.
– Built-in external power supply + 24 V
– Integrated 6 or 4 digital inputs (depending on the power model), 1 analog input 0-10 V or 4-20 mA,
– 2 multifunction relay outputs
– Standards EN / IEC 61800-3: 2017; C2, which is suitable for 1. Environment, EN 61800-3: 2004 + A1: 2012; EN 618-5-1: 2007 + A1: 2017
– The X 550-4T…. Models are supplied with the power cord connected
Series X550 Plus 230V
| Type | Power | Voltage | Price | |
|---|---|---|---|---|
Variable frequency drive X550 2S0007 |
0,75 kW | 230 V | – | See more |
Variable frequency drive X550 2S0015 |
1,5 kW | 230 V | – | See more |
Variable frequency drive X550 2S0022 |
2,2 kW | 230 V | – | See more |
Series X550 Plus 400V
| Type | Power | Voltage | Price | |
|---|---|---|---|---|
Variable frequency drive X550 4T0005 |
0,55 kW | 400 V | – | See more |
Variable frequency drive X550 4T0007 |
0,75 kW | 400 V | – | See more |
Variable frequency drive X550 4T0011 |
1,1 kW | 400 V | – | See more |
Variable frequency drive X550 4T0015 |
1,5 kW | 400 V | – | See more |
Variable frequency drive X550 4T0022 |
2,2 kW | 400 V | – | See more |
Variable frequency drive X550 4T0040 |
4 kW | 400 V | – | See more |
Variable frequency drive X550 4T0055 |
5,5 kW | 400 V | – | See more |
Variable frequency drive X550 4T0075 |
7,5 kW | 400 V | – | See more |
Variable frequency drive X550 4T0110 |
11 kW | 400 V | – | See more |
Variable frequency drive X550 4T0150 |
15 kW | 400 V | – | See more |
Variable frequency drive X550 4T0185 |
18,5 kW | 400 V | – | See more |
| Item | X550 | |
|---|---|---|
| Supply voltage | Rated voltage, frequency |
1 phase 1x 230 V AC 230V 50 / 60Hz & # 8230; & # 8230; & # 8230; .Type: 2S 3 phase 3x 400 V AC 400V 50 / 60Hz & # 8230; & # 8230; & # 8230; .Type: 4T |
| Voltage range | 230V: 170V to 240V 400V: 330V to 440V |
|
| Output | Voltage range | 3 x 230 V: 0 to 230 V 3 x 400 V: 0 to 400 V |
| Frequency range | 0.10 to 400.00 Hz | |
| Management method | V / F control, scalar control | |
| View | Operating status / Alarm definition / interactive guidance: e.g. Frequency setting, output frequency / current, DC bus voltage, temperature, etc. | |
| Control specifications | Output frequency range | 0.10 to 400.00 Hz |
| Frequency setting resolution | Digital input: 0.01 Hz, analog input: 0.1% of maximum output frequency | |
| Output frequency precision | 0.01 Hz | |
| V / F control | Setting up V / F curves to meet different practice requirements | |
| Torque Management | Auto-increase: automatically increases torque according to load; Manual increase: allows you to set a 0.0 to 20.0% torque increase. |
|
| Multifunctional input terminal block | Four or six multifunction input terminals that perform functions including fifteen section speed control, running program, four-stage acceleration / deceleration switch, UP / DOWN function and emergency stop and other functions & # 8230 ; | |
| Multifunction output terminal block | 2 multifunction output terminals for run information, zero speed, counter, external abnormalities, program operation and other information and alerts. | |
| Set acceleration / deceleration time | Acceleration / deceleration time can be set individually from 0 to 999.9s | |
| More features | PID control | Built-in PID control |
| RS 485 | Standard RS485 communication function (MODBUS) | |
| Frequency setting | Analog input: 0 -10 V; 0 & # 8211; 20 mA, optional; Digital input: using the buttons on the UP / DOWN panel Communication: via RS485 port |
|
| Multistage | Six (four) multifunction input terminals, 15 speed settings can be selected. | |
| Automatic voltage regulation | AVR automatic voltage regulation function can be selected | |
| Counter | Built-in 2 groups of counters | |
| Warning / protection functions | Congestion | 150% / 60 sec., (constant torque) |
| Overvoltage | Surge protection can be set. | |
| Underscore | It is possible to set low voltage protection. | |
| Other protections | Overheat; output short circuit; overcurrent; parameter blocking, etc. | |
| EMC | EMC compatibility | IEC 61000-4-6; IEC 61000-4-4; IEC 61000-4-11; IEC 61000-4-5 |
| Standards | EN / IEC 61800-3: 2017; C2, which is suitable for 1. Environment EN 61800-3: 2004 + A1: 2012; EN 618-5-1: 2007 + A1: 2017 |
|
| Environment | Ambient temperature | – 10 ° C to 40 ° C (frost-free) |
| Humidity | Max. 95% (no condensation); IEC 60068-2-3 | |
| Altitude | Less than 1000 m.n.m. | |
| Vibrations | Max. 0.5 g; IEC 60068-2-6 | |
| Cooling method | Forced air cooling | |
| Degree of coverage | IP 65 | |
| Assembly method | On the wall | |
| Installing in an environment | Resistance to chemical pollution class 3C3 EN / IEC 60721-3-3. Dust resistance 3S3EN / IEC 60721-3-3. | |
Frequency converters X550 in stock
The frequency converter for the X550 pump with IP65 protection meets strict standards. The X550 series frequency converters provide speed control of three-phase asynchronous motors used in medium-demanding applications where resistance to dust and splashing water is required. The control of the X550 inverters is smooth and there are no losses. They are used as frequency converters for pumps, as frequency converters for dusty environments, as frequency converters for environments where there is water spray and the like. The great advantage of these converters is the number of functions.
Frequency inverter X550 - Industrial use:
– electric gearboxes
– cutting machines
– air conditioning
– textiles
– ceramics
– grocery store
– centrifugal machines
– cutters
– grinders
– diving machines
