Electric motor 900 kW, 2988 rpm, 6000 V, H17R-450-B-2-6 MV

ELECTRIC MOTOR 900kW 2982RPM H17R-450-2, 6000V, 6KV MEDIUM OR HIGH VOLTAGE MOTO

Type

H17R-450-2

Brand

VYBO Electric

Power

900 kW

Rated current

103,8 A

Speed

2982 rpm

Frequency

50 Hz

Locked Rotor Current

700 %

Rated Torque

2882,3 Nm

Locked Rotor Torque

70 %

Breakdown Torque

200 %

Noise level

98 dB(A)

Approx. weight

4830 kg

Rotor inertia

22 kg/m2

Slip

0,0067

Efficiency (50%)

93

Efficiency (75%)

95,9

Efficiency (100%)

95,9

Power factor (50%)

0,74

Power factor (75%)

0,83

Power factor (100%)

0,87

Frame

450 mm

Poles

2

Rated voltage

6 000 V

Connection

Y

Insulation class

F

Temperature Rise

80K

Service factor

1,0

Duty

S1

3D video of electric motor

Ambient temperature

-20~40°C

Altitude

1000 m

Protection degree

IP55

Cooling

IC411

Mounting

IM B3

Vibration

2.8 mm/s

Direction of rotation

CW

Starting method

DOL

Coupling

direct

Load type

parabolic/linear curve

Bearing

DE-6222C3 / NDE-6222C3

Regreasing int. (h)

DE-2000 / NDE-2000

Grease amount (g)

38

Grease

CALTEX SRI-2#

Specification

IEC60034-1 / GB755

Test

IEC60034-2 / GB/T1032

Noise

IEC60034-9 / GB10069.3

Vibration

IEC60034-14 / GB10068

Long description

For operations where stable torque and low losses are decisive, the H17R-450-B-2-6 model with an output of 900 kW is designed to operate reliably in the speed range of 2900-3000 rpm. In practice, this means smooth starting of technological units, high operational reliability and efficient integration into medium-voltage drives that must withstand load and changes in operating mode over the long term. This medium-voltage asynchronous electric motor from VYBO Electric is based on in-house development and the use of premium materials that support a long service life in industrial operation.

Efficient operation at rated speeds in the range of 2900-3000 rpm

The rated speed of 2988 rpm in this segment gives engineers confidence that the motor will fit applications requiring precise speed ratios and consistent performance when powered by 6000 V. The rated torque of 2877 Nm provides a reserve for both starting and steady-state modes, while an efficiency of 96.3 % helps reduce energy losses in long-term operation. A power factor of 0.9 contributes to balanced drive behaviour in the electrical network, and the rated current of 100.4 A is important when designing the power supply, switching and protection systems.

When designing for heavy industry, it is also important how the motor responds to mechanical and thermal load. The value of Tst/Tn 0.71 % and Tmax/Tn 3 % allow a more precise assessment of starting and maximum operating ratios, while the Ist/In ratio of 7 % helps designers choose the downstream components. Insulation class F together with temperature rise B supports operation in a mode where long-term thermal stability is expected. The rotor inertia of 6.2 kg·m² is important in drive dynamics calculations, especially where precise control of starting or braking is required.

Design that supports a long service life in demanding environments

The 450 mm frame size provides a robust basis for industrial use while also making it easier to integrate the motor into existing technological assemblies. The copper bar rotor cage increases resistance to both electrical and mechanical stress, which is beneficial in applications with frequent operating cycles. 6322-C3 bearings on both the DE and NDE sides support smooth running and are suitable for operations where not only performance is monitored, but also service reliability and predictable maintenance.

The motor accessories further simplify monitoring of the drive condition. PT100 winding and bearing sensors provide more accurate temperature control, the anti-condensation heater helps reduce the risk of moisture during shutdowns, and a set of three PTC thermistors adds another layer of protection under thermal stress. In practice, this is especially appreciated by integrators who need to combine performance with diagnostics and service readiness without unnecessary compromises.

Industrial applications of the medium-voltage motor

This three-phase 6 kV motor is used in technological units where high output, reliable starting and long-term operational stability are crucial. MV electric motors of this class are commonly deployed in power generation, heavy industry and systems with demanding network infrastructure, where it is necessary to precisely match the motor, converter or direct start, and the mechanical load. For OEM manufacturers and operators alike, the ability to address specific conditions already at the design stage is important.

  • Pump units for water management and power generation.
  • Fans and blowers in process lines.
  • Compressor stations with high continuous load.
  • Grinding mills and crushers in the raw materials industry.
  • Rolling and conveying technological units.
  • Mixers and blending units for heavy processes.
  • Centrifuges and separation equipment.
  • Main drives in cement plants.
  • Mining and processing lines.
  • Special drive assemblies for MV system integrators.

Parameters that simplify drive design and servicing

When designing a drive system, the figures that directly affect sizing and service intervals also matter. The weight of 4800 kg is relevant for installation, handling and the assessment of load-bearing elements in the machine room. Transport and installation planning is also made easier by the fact that the motor is structurally designed for demanding use with an emphasis on stability and long service life. The VYBO Electric technical team can provide recommendations for the solution according to the operating environment, the required protection rating and the connection to the downstream technology.

If the project requires greater resistance to dust, moisture or industrial contamination, the available IP56, IP65, IP66 and IP67 protection variants make it possible to adapt the motor to the conditions of the specific operation. This is especially practical in environments where, during long-term use, not only efficiency is monitored, but also the protection of the investment and the reduction of unplanned downtime. We recommend checking the suitability of the motor for your application already at the specification stage, so that the power and installation parameters are set correctly from the outset.

Service support for long-term operation

VYBO Electric is one of the largest companies in its field in Central Europe and builds its position through a combination of in-house development, technical advice and an emphasis on quality workmanship. At this power and voltage class, it is important to have a partner who understands not only the motor, but the entire drive chain. That is why the H17R Compact PRO-MV is a suitable choice for customers who want to combine performance, availability and expert support in design and deployment.

If you need a motor for a technological unit with clearly defined operating requirements, this model represents a solution with a high degree of technical reserve and service readiness. Stock availability and immediate dispatch shorten the time between design and installation, which is a major advantage in industrial projects. Check the suitability of the motor for your application and make use of the support of technicians who can design the optimal integration into the specific operation.

H17R-450-B-2-6 with an output of 900 kW for a voltage of 6000 V and a nominal speed of 2988 rpm is designed for reliable operation in demanding service. Frame 450 mm, that is the frame size, allows suitable adaptation to the environment, including IP56, IP65, IP66 or IP67 protection. VYBO Electric relies on in-house development, premium materials and strong technical background in Central Europe. Long description

Availability: In stock

elektromotory vybo

Factory and great warehouse in one place

Price on request

vybo electric

Online contact

slovensko vybo electric

Model

H17R 450-2

Power

900 kW

Rated voltage

6 000 V

Frame

450 mm

Poles

2

Frequency

50 Hz

Speed

2982 rpm

Dimensions

Datasheet online

Comments are closed.